Understand your flight

What's that noise when the plane lands?

The thump, the roar and the push into your seat belt right after landing can feel dramatic. Here's what those sounds usually are — spoilers, reverse thrust and brakes — explained from the FAA's Airplane Flying Handbook, so the arrival feels like a routine instead of a scare.

4 official sources, listed at the end Checked November 5, 2026
Photo: Michael, Public domain
In this article · 7 sections
  1. The short answer
  2. The soundtrack of a normal landing
  3. Spoilers: the panels that stand up on the wing
  4. Reverse thrust: why the engines get loud again
  5. Brakes, the firm landing, and why gear can take it
  6. What to do with the feeling
  7. Keep reading

Flying soon? Our 7-day program walks you through your trip one calm step a day, and you can try a lesson free first. See what's inside.

The short answer

Right after the wheels meet the runway, a lot happens at once on purpose. Spoilers rise on the wings, reverse thrust may roar, and the brakes bite. Together they slow a heavy airplane that still has a lot of energy. The FAA's Airplane Flying Handbook describes those three stopping forces — wheel braking, reverse thrust and aerodynamic drag — and notes that for most landings the brakes are the most important of the three.1

If the roar makes your stomach drop, you're not alone. It's one of the loudest normal moments of the whole flight.

Heart racing on short final? The anxious-right-now page has quick help. Our sounds guide covers the whole flight gate to gate.

The soundtrack of a normal landing

Exact sounds vary by airplane, but this is the usual order:

  1. Quieter engines on the way down. Jets often descend with thrust near idle.
  2. Whirring as flaps and slats extend so the wing can fly slowly for the approach.
  3. A rumble and a thud when the landing gear comes down and locks, often a few minutes before touchdown.
  4. A firm thump at touchdown as the main wheels meet the runway.
  5. A loud roar and a push forward as reverse thrust, spoilers and brakes work together.
  6. The roar fading as the airplane slows to taxi speed and reverse is stowed.

Keep your seat belt on. The seat belt sign rules exist so you're secured for bumps and for this deceleration too.4

Spoilers: the panels that stand up on the wing

Spoilers are plates on top of the wing. In the air they can help control descent. On the ground after landing, flight and ground spoilers are deployed so most of the wing's lift is destroyed. That puts more of the airplane's weight on the landing gear so the wheel brakes work better. A secondary benefit is extra drag.1

The handbook says spoilers should be deployed immediately after touchdown because they are most effective at high speed. Timely spoilers increase drag and, more importantly, load the wheels so maximum tire braking is available.1

From your window, that often looks like a row of panels flipping up along the wing. From your seat, you may hear a brief hydraulic whir and feel the airplane settle more firmly onto its wheels.

Reverse thrust: why the engines get loud again

Jet airplanes still produce some forward thrust even at idle, and they are aerodynamically clean with the nose-wheel down, so they don't slow as quickly as you might expect from "idle" alone. Reverse thrust redirects engine airflow more forward to help decelerate. It doesn't usually reverse the flow a full 180 degrees; the handbook notes a typical path around 45 degrees from straight ahead, with losses that reduce efficiency.1

Key points the FAA emphasizes:1

  • Reverse thrust is more effective at high speed than at low speed
  • Pilots should use it as soon as is prudent after touchdown
  • On many types, significant reverse thrust waits until the nose-wheel is on the ground
  • When runway length isn't a factor, idle reverse may be enough
  • Wheel brakes remain the primary stopping force on most landings; reverse assists

That sudden roar is the reversers doing their job, not the engines "struggling." When reverse is canceled, the levers return to forward idle and the sound drops quickly.

Brakes, the firm landing, and why gear can take it

Of the three stopping forces, brakes are usually the most important, and they work best as the airplane slows.1 Spoilers help by loading the wheels; reverse helps most right after touchdown; brakes finish the job down to taxi speed.

A landing that feels "firm" is often intentional. The handbook describes flying the jet onto the runway rather than holding it off to bleed speed, and notes that a deliberate, positive touchdown helps avoid a long float down the runway.1 On wet runways especially, a greaser isn't always the goal — our guide to why some landings feel hard explains that part.

Airliner landing gear is also certificated for much firmer arrivals than a normal thump. US rules require landing-load assumptions that include a sink rate of 10 feet per second at design landing weight — far firmer than a typical passenger landing feels.3

What to do with the feeling

  • Expect the roar. Mentally labeling it ("that's reverse thrust") often cuts the fear in half.
  • Stay belted until the airplane is parked and the crew says you may get up.4
  • Watch the wing if you have a window: spoilers up is a visual confirmation that the stopping systems are working.
  • Ask a flight attendant after landing if a particular sound still bothers you — they're used to these questions.
  • Practice ahead of time with My Flight and the in-flight pack, which works offline.

The calm takeaway: the landing roar is reverse thrust and spoilers helping the brakes slow the airplane, right when those tools work best. Loud can still be normal. If landings are the part you dread most, the 7-day program walks through the sounds one day at a time.

Keep reading

Quick answers

Why do the engines roar right after landing?

That is usually reverse thrust. The engines redirect airflow forward to help slow the airplane. The FAA notes reverse thrust is most effective at high speed, so pilots use it soon after touchdown.

What are the panels that pop up on the wings after landing?

Those are spoilers. After landing they spoil most of the wing's lift so more weight sits on the wheels for better braking, and they also add drag.

Why do I get pushed forward against my seat belt after touchdown?

Brakes, spoilers and reverse thrust are all slowing the airplane at once. Your body wants to keep moving forward, so you feel it in the belt. Keep it fastened until you're at the gate.

Was a firm landing a bad landing?

Not necessarily. A positive touchdown helps the wheels spin up and systems like spoilers and anti-skid work promptly. Landing gear is designed and tested for much firmer arrivals than a normal "thump" feels.

Feeling tense right now? Two minutes of guided breathing can help your body settle. It works offline too.

Sources

(4)
  1. FAA Airplane Flying Handbook (FAA-H-8083-3C), Chapter 16 (spoilers and thrust reversers)
  2. FAA Airplane Flying Handbook (FAA-H-8083-3C) landing overview
  3. 14 CFR § 25.473, Landing load conditions and assumptions
  4. FAA, Turbulence: Staying Safe (seat belt sign)

Facts last checked against these sources: November 5, 2026.